Installing RAMN’s scripts

Follow these steps to install RAMN’s scripts:

Download the content of RAMN GitHub repository. You can unzip the file that you can download by clicking Code -> Download Zip, or you can use the following command on Linux:
$ git clone https://github.com/ToyotaInfoTech/RAMN
Open a command prompt in the RAMN/script folder (on Windows, open the folder in Windows Explorer and type “cmd” in the address bar) and execute the following command:
$ pip3 install -r requirements.txt

Configuring RAMN’s scripts

The default settings should work on any computer.

If you want, you can modify the following settings in scripts/settings/windows.ini (when using Windows) and scripts/settings/linux.ini (when using Linux):

PORT specifies the serial port name used by scripts (e.g., COM1 or /dev/ttyACM0). You can use “AUTODETECT” to let the scripts automatically find a RAMN port.
ECUx_FIRMWARE_PATH specifies the firmware files used to reprogram/verify the firmware of ECUs.
VERBOSE specifies the verbose level of scripts (0 to only output errors, 4 to output everything including debug messages).
TIMEOUT specifies the timeout value for reading from the serial port.
CAN_NAME specifies the name of the channel for scripts that rely on CAN rather than serial.
CAN_TYPE specifies the name of the interface type for the above.
CAN_REFRESH_RATE specifies how often scripts should update the CAN bus (for scripts that use CAN).
VCAND_HARDWARE_PORT is the default hardware port used by the vcand scripts.